Purchase these Items

Products mentioned in this Article

 

 

Armies Of Late War

 

Assembling The Sd Kfz 234 Variants
Assembling the Generic Hull
Each of the four Sd Kfz 234 variants all shares a number of common components. These are highlighted in green on the plastic sprue shown below. These components make up the generic hull that can be used as a base to the model whichever variant of the Sd Kfz 234 you wish.
Assembling the Puma
Step 1. Start assembly of the generic hull by joining the top and bottom halves of the hull together. Step 2. Next, attach the right-hand side wheel bogies...
Assembling the Puma Assembling the Puma
Step 3. ...followed by the left-hand-side wheel bogies. Step 4. Attach the bumper to the front of the hull.
Assembling the Puma Assembling the Puma
Step 5. Add the spare tire to the rear of the hull. Step 6. To complete assembly of the generic hull, attach the Jerry can stowage to each front fender.
Assembling the Puma Assembling the Puma
Assembling the Sd Kfz 234/1 (2cm)
Along with the generic hull, the components highlighted in blue on the plastic sprue below are used to model the Sd Kfz 234/1 (2cm).
Assembling the Puma
Step 1. Attach the 2cm KwK 38 L/55 gun assembly to the inside of the turret.  Step 2. Next, attach the grenade screen to the top of the turret.
Assembling the Puma Assembling the Puma
Step 3. Attach the Sd Kfz 234/1 (2cm) specific stowage bin to the side of the generic hull. Step 4. Attach the top deck to the top of the hull. Step 5. Use the turret peg or rare-earth magnets as a quick and easy way of attaching the turret to the hull.
Assembling the Puma Assembling the Puma Assembling the Puma
Step 6. Add the turret to the hull. Below: With the turret attached, the Sd Kfz 234/1 (2cm) is now fully assembled.
Assembling the Puma Assembling the Puma
Assembling the Sd Kfz 234/2 Puma
Along with the generic hull, the components highlighted in white on the plastic sprue below are used to model the Sd Kfz 234/2 Puma.
 Assembling the Puma
Step 1. Attach the Sd Kfz 234/2 Puma specific stowage bins to each side of the generic hull.
Assembling the Puma Assembling the Puma
Step 2. Attach the top deck to the top of the hull. Step 3. Join the top and bottom sections of the turret. Step 4. Attach the main gun to the front of the turret. 
Assembling the Puma Assembling the Puma Assembling the Puma
Below: The turret hatch can be modelled either open or closed. Step 5. Attach the hatch to the top of the turret.
Assembling the Puma Assembling the Puma
Step 6. Add a commander figure of choice to the open turret hatch. Step 7. Use the turret peg or rare-earth magnets as a quick and easy way of attaching the turret to the hull.
Assembling the Puma Assembling the Puma
Step 8. Add the turret to the hull. Below: With the turret attached, the Sd Kfz 234/2 Puma is now fully assembled.
Assembling the Puma Assembling the Puma
Adding Rare Earth Magnets
Alternatively, you may choose to glue rare earth magnets into the recess in the hull and to the bottom of the turret. Magnets are a quick and secure way of fixing your turrets to the hulls, as an alternative to the included plastic peg.

Rare Earth Magnets (XX105) are available through the online store here...

Rare Earth Magnets (XX105)
Assembling the Puma Assembling the Puma Assembling the Puma Read Chris' guide to Rare Earth Magnets here for more tips and tricks...

Assembling the Sd Kfz 234/3 (7.5cm)

Along with the generic hull, the components highlighted in yellow on the plastic sprue below are used to model the Sd Kfz 234/3 (7.5cm).
Assembling the Puma
Step 1. Attach the Sd Kfz 234/3 specific stowage bin to the side of the generic hull. Step 2. Attach the main gun to the hull superstructure.
Assembling the Puma Assembling the Puma
Step 3. Attach the coaxial machine-gun to the side of the main gun. Step 4. Add the main gun assembly to the generic hull. Below: With the main gun assembly in place, the Sd Kfz 234/3 (7.5cm) is now fully assembled.
Assembling the Puma Assembling the Puma Assembling the Puma
Assembling the Sd Kfz 234/4 (PaK40)
Along with the generic hull, the components highlighted in red on the plastic sprue below are used to model the Sd Kfz 234/4 (PaK40).
Assembling the Puma
Step 1. Attach the Sd Kfz 234/4 (PaK40) specific stowage bin to the side of the generic hull. Step 2. Attach the main gun to the hull superstructure.
Assembling the Puma Assembling the Puma
Step 3. Next, attach the gun shield to the 7.5cm PaK 40. Step 4. Followed by the AA machine-gun.
Assembling the Puma Assembling the Puma
Step 5. Add the main gun assembly to the generic hull. Below: With the main gun assembly in place, the Sd Kfz 234/4 (PaK40) is now fully assembled.
Assembling the Puma Assembling the Puma


Last Updated On Thursday, November 16, 2017 by Luke at Battlefront