Introduction to Battlefront
Paints & Decals
Product Assembly Guides
Purchase these Items
Products mentioned in this Article
UBX55 M4 Sherman Tank Platoon (Plastic)
USAB08 Patton’s Fighting First (Plastic)
Assembling the L6/40 (IBX17)
Assembling the AB41 (IBX16)
Assembling 90mm Lancia (IBX15)
Assembling The Autocannone (IBX20)
Assembling The Falco CR42 (IBX19)
Assembling The Italian 88mm Anti-Tank Battery (IBX13)
Assembling The 100MM Howitzer (IBX12)
Assembling The Semovente (ITAB02)
Assembling the Bersaglieri Assault Engineer Platoon (IT765)
Assembling the Bersaglieri Weapons Platoon (IT762)
Begin assembly of the Sherman by attaching the left-hand side track to the hull section.
Next, attach the right-hand side track to the hull section.
Both tracks in place.
Next, attach the hull rear piece to the rear of the hull section.
Attach your choice of transmission housing to the front on the hull assembly.
Transmission housing in place.
Mount the upper hull on the lower hull assembly.
Upper hull in position.
Assemble the main turret pieces.
Affix the trunion to the turret assembly, noting the
The trunion in position
Attach the 75mm gun to the trunion.
Mount your choice of hatch on the top of the turret.
Open hatch in position.
Attach the hull MG to its mounting point on the hatch.
Glue your choice of commander in to the open hatch.
Affix a peg to the turret.
Turret peg in place.
Position the turret on top of the hull assembly.
A fully assembled M4 Sherman.
Last Updated On
Wednesday, October 4, 2017
by Chris at Battlefront
Battlefront Miniatures 2006-2017. Website by