Introduction to Battlefront
Paints & Decals
Product Assembly Guides
Assembling the L6/40 (IBX17)
Assembling the AB41 (IBX16)
Assembling 90mm Lancia (IBX15)
Assembling The Autocannone (IBX20)
Assembling The Falco CR42 (IBX19)
Assembling The Italian 88mm Anti-Tank Battery (IBX13)
Assembling The 100MM Howitzer (IBX12)
Assembling The Semovente (ITAB02)
Assembling the Bersaglieri Assault Engineer Platoon (IT765)
Assembling the Bersaglieri Weapons Platoon (IT762)
Assembling the Bersaglieri Rifle Platoon (IT763)
Assembling the Bersaglieri MG & Mortar Platoon (IT764)
Assembling the Italian AT Gun Platoon (IBX18)
Assembling the 105mm Field Artillery Battery (UBX60)
Assembling The M14/41 (ITAB02)
Do You Know What We Did Last Summer?
Fighting First Assembly Guides
Wayne bases his Gebirgsjäger
Assembling the ZIS Guns
Page 1 of 17 (326 items),
Assembling the ISU
ISU Hull Top Sprue
Hull and Track Sprue
Begin assembly by gluing the tracks onto the hull. The keys ensure you put the tracks on the correct sides.
Now glue the body onto the hull.
Next glue on commander's hatch piece. You can chose between an open or closed hatch.
Time to add the gun. You can chose between the 152mm and 122mm guns. Make sure the gun is completely inside the mantlet, rotate it so the keys line up.
Glue the gun mount top of piece in place.
Glue the vision port and headlight piece to the front of the body. There is a key to help position it correctly.
Next, glue the superstructure back plate to the body as seen below.
Adding the external fuel drums. The standard layout was two on each side of the hull. But historical photos commonly show vehicles with some or all of the tanks removed, so feel free to leave some off to give your force some variety.
There is also an option to add spare tracks to the front of the hull.
a completed ISU-152
Battlefront Miniatures 2006-2017. Website by